NEWS

From June 4 to June 6, the plant carried out re-audit for compliance with the requirements of the international standard ISO 9001

From June 4 to June 6, the plant carried out re-audit for compliance with the requirements of the international standard ISO 9001.

Modernization of GSW strip coiling line completed

5/26/19

The commissioning operations on the GSW strip coiling line modernization were completed under the guidance of Jansen Antriebstechnik GmbH technician. New machinery, optical sensors and strain gauge transducers were installed into the line, software was replaced. Now it is possible to control the actual tension force of the strip during its recoiling.

Company representatives visited the Elektro 2019 exhibition

4/17/19

From 15th to 17th April company representatives visited the Elektro 2019 exhibition, which was held at the Expocentre on Krasnaya Presnya, Moscow.

Company representatives visited the Hannover Messe 2019 exhibition

4/10/19

From 1st to 5thApril company representatives visited the Hannover Messe 2019 exhibition, which was held at the exhibition center in Hannover (Germany).

Сylindrical grinding parts is in great demand

3/27/19

Since 2018 the company has started to provide services for the external cylindrical grinding of parts and tools according to customer drawings (mill rolls, knife discs and rings, shafts, rods, arbors, etc.).

Company representatives visited the Elektrotechnik 2019 exhibition

2/15/19

From 13th to 15th February company representatives visited the Elektrotechnik 2019 exhibition, which was held at the Westfalenhallen Exhibition Center in Dortmund (Germany).

Modernization of GSW strip coiling line

11/25/18

The company purchased new machinery and components designed for modernization of GSW strip coiling line. Upgrade of the equipment will provide continuous control of the strip tension along the entire length of a coil, in the process of its recoiling with oiling.

Upgrade and repair of continuous annealing furnace

9/27/18

A scheduled upgrade and repair of the KOHNLE continuous annealing furnace were carried out. Muffles, conveyor mechanism and the heating elements of the furnace were completely replaced. These activities were aimed at improving the quality of products, to fulfill any requirements of our customers for multi-layered strips coated with aluminum and nickel.

Сylindrical grinding services

8/16/18

The company provides services for the external cylindrical grinding of cylindrical surfaces according to customer’s drawings (mill rolls, knife discs and rings, shafts, rods, arbors, etc.).

We have moved to a new standard of quality

6/28/18

From June 26 to June 27, the plant carried out the 2nd witness audit for compliance with the requirements of the international standard ISO 9001.

vehicle ramp for loading and unloading was mounted and began operating

6/20/18

In June 2018 a vehicle ramp for loading and unloading was mounted and began operating.

Installation and commissioning of the Slitting line type SLM 40 produced by NOBAG Nobs Engineering AG (Switzerland) have been successfully completed.

10/5/17

Installation and commissioning of the Slitting line type SLM 40 produced by NOBAG Nobs Engineering AG (Switzerland) have been successfully completed.

The company took part in technical symposium on cold and hot rolling Cold & Hot Rolling Day Moscow 2017

10/5/17

From September 26 to September 28 the company took part in technical symposium on cold and hot rolling Cold & Hot Rolling Day Moscow 2017, in which the following companies presented their latest developments:

the Finish line before the launch of the Slitting Line type SLM 40 produced by “NOBAG Nobs Engineering AG” (Switzerland)

9/8/17

Preparatory works before installation and commissioning of the new equipment – Slitting line type SLM 40 produced by NOBAG Nobs Engineering AG (Switzerland) have been completed.

We are going to a new quality standard ISO 9001: 2015

9/7/17

From July 27 to July 28, 2017 a corporate training workshop “QMS transition to the new version of ISO 9001: 2015 standard. Refresher course for QMS internal auditors (ISO 9001: 2015)” was successfully held at Kaluga non-ferrous metals processing plant LLC under the guidance of the Chief coach-consultant Sergei Popov.

Certificate for the management system according to ISO 9001 – is confirmed

7/6/17

From July 4 to July 5, the plant carried out the 1st witness audit for compliance with the requirements of the international standard ISO 9001. As a result of the audit, it was confirmed that the actual management system of the company is effective.

Well done!

5/26/17

The maintenance service of high-convection gas heating bell-type furnace plant Hog 160/350 was successfully performed under supervision of EBNER company technicians.

We did it: both slitting and cutting to length…

5/26/17

Until now, Kaluga non-ferrous metals processing plant LLC produced clad strips only in coils of different dimensions varying by thickness and width and, accordingly, by weight of the coil.

Maintenance service bell-type furnace produced EBNER COMPANY is planned

3/1/17

Maintenance service on high-convection gas heating bell-type furnace plant Hog 160/350, under supervision of EBNER company technicians is planned for April – May 2017.

The contract for supply of slitting line type SLM 40 are signed

11/1/16

The company signed a contract with a Swiss company NOBAG Nobs Engineering AG for supply of Slitting line type SLM 40.

The contract for supply of cut-to-length metal strips line are signed

9/1/16

The company signed a contract with a German company GSW Schwabe AG for the design and supply of new equipment – GSW metal strips cut-to-length line with a control system for strip material feeding and cutting with subsequent stacking.